Service available now · 50 states Mon–Sun · 7AM–9PM EST

La Cornue Range Top Repair

Expert La Cornue range top repair for gas, dual-fuel, and induction units. We service burner ignition, uneven heating, grate and cap issues, and control knobs. Genuine La Cornue parts with a 30-day labor warranty.

Models Gas · French Top · Grill · Induction · Teppanyaki · Flamberge Series Mix-and-match element modules Coverage All 50 US states Response ~24h average

Schedule La Cornue
appliance repair

Certified technicians in all 50 US states. Average response within 24 hours.

  • Certified La Cornue specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront flat-rate pricing

What we fix on La Cornue range tops.

/01

Gas burner ignition fails

A brass gas module will not light while others spark. Clogged ports or orifice, a cracked or wet electrode, or a misaligned burner cap on that zone.

/02

French-top uneven or cracked

The cast-iron French top (plaque coup de feu) heats unevenly, cracks, or warps. Thermal shock, standing water, or lost seasoning; severe cases require plate replacement.

/03

Grill module clogged

The lava-rock gas grill burns weakly or unevenly. Grease-fouled lava rocks, blocked burner ports under the rock tray, or an air-shutter set incorrectly.

/04

Induction zone fail or "U"

An induction module zone shows "U" or will not heat. No or incompatible pan detected; if a known-good pan fails on one zone only, the coil or pan sensor is faulty.

/05

Teppanyaki not heating

The electric teppanyaki plate fails to reach temperature. A burned element, a failed thermostat, or a control connection fault on the module.

/06

Flamberge rotisserie fault

The Flamberge gas rotisserie burner won't ignite or the spit motor stops. A weak igniter or safety valve on the burner, or a failed rotisserie drive motor.

/07

Valve leak or stiff knob

A module valve seeps gas or the knob binds. Worn valve stem packing or a loosened fitting (gas smell — stop use), or hardened grease stiffening the knob.

/08

Yellow flame (air/LP-NG)

A burner burns yellow and sooty. An air shutter set wrong, a dirty orifice, or an LP/NG conversion that was not completed for the installed fuel.

/09

Spark module clicking

The igniter clicks continuously across modules. Moisture or a cracked electrode, or a stuck spark switch shorting the ignition module.

/10

Hob surface discoloration

Stainless or enamel hob surfaces discolor or stain around the modules. Heat tint and cleaning residue; addressed with correct surface care, not abrasives.

/11

Drip-tray or grate corrosion

Cast grates, drip trays, or burner caps corrode or pit. Standing moisture and harsh cleaners; cleaned and re-protected, or replaced when pitting is deep.

/12

Loose or worn knobs

Control knobs wobble, slip, or no longer index to settings. A worn knob bore, a stripped valve stem, or a loose bezel on the control panel.

These are the most common issues — not an exhaustive list. Our technicians diagnose and repair any La Cornue range top problem, including intermittent faults, unusual symptoms, and issues not listed here.

Range Top repair in all 50 US states.

All locations →
Our certified La Cornue range top technicians are dispatched from local hubs in every major US metro. Whether you're in New York, Los Angeles, Chicago, Houston, Miami, Dallas, or a smaller city — we provide the same fast, expert service with genuine parts.
About La Cornue range top repair

Expert La Cornue range top repair for gas, dual-fuel, and induction units. We service burner ignition, uneven heating, grate and cap issues, and control knobs. Genuine La Cornue parts with a 30-day labor warranty.

F — Get started

Schedule your La Cornue
range top repair today.

Book online and save 10% on labor. Available in all 50 US states, 7 days a week.