La Cornue Range Top Clicking
La Cornue Range Top Clicking is a fault our factory-trained technicians diagnose and repair with genuine parts. Below is what it means, the most likely causes, and the steps to try before booking service.
What Spark Module Clicking means on your La Cornue Range Top
Continuous clicking from a La Cornue range-top spark module is an indicator, usually caused by moisture or a sticking ignition switch. The constant sparking should be stopped to protect the switches and electrodes.
Symptoms to look for
The signs below help confirm you are dealing with this condition rather than a different fault. You may notice just one of them or several together, and they can appear gradually over time or suddenly after a spill, a power event, or recent service.
- Clicking continues after the burner lights
- Clicking with all knobs off
- Often after cleaning or boil-over
- May involve several burners
Common causes
Several different faults can produce these symptoms. Working through the most likely causes in order helps you separate a quick, inexpensive fix from a problem that needs trained service and the correct La Cornue parts.
- Moisture — water shorts the spark circuit
- Misseated caps — disrupt the spark gap
- Sticking switch — stays partly closed
- Debris on electrodes — fouled spark tips
Troubleshooting steps you can try
Work through these checks in order, with the appliance cool and powered down before you touch any internal part. Stop at any point where you are unsure, or where gas, high heat, or live electrical parts are involved, and hand the remaining diagnosis to a qualified technician.
- Dry the caps and surrounding area thoroughly.
- Reseat each cap squarely.
- Air-dry fully after cleaning.
- If clicking persists with knobs off, suspect a stuck switch.
When to call a technician
If drying does not stop it, a sticking switch usually needs a technician. Persistent sparking wears the switches and electrodes. You can reach the La Cornue National Service Center on 1-877-522-6768, or find an authorized technician through the manufacturer at lacornueusa.com. La Cornue appliances are hand-built and use proprietary parts, so factory-trained service protects both your warranty and the appliance.
Parts a technician may replace
Depending on what the diagnosis shows, a technician may inspect, test, or replace the spark module, electrodes, ignition switches, and burner caps. The correct part for your configuration is identified from the model and serial number; on La Cornue appliances these are proprietary components fitted by trained service rather than generic substitutes, which protects both performance and the appliance’s long-term value.
Safety and prevention
To reduce the chance of this returning on your La Cornue Range Top, keep up with routine care — clean spills before they bake on, follow the manufacturer’s maintenance schedule, and avoid abrasive pads or harsh chemicals on enamel, brass, and finished surfaces. Periodic professional servicing catches wear items early, and addressing small performance changes promptly usually means a simpler repair. When you book service, having the model and serial plate details and a note of exactly what you observed will help the visit go quickly. A clear description of when the problem started and what you were cooking at the time often points the technician straight to the cause. Because every La Cornue range is built to order, repairs are matched to your specific configuration, finish, and fuel type rather than a one-size-fits-all part.
Need help now? Book a certified technician on our schedule page, explore more La Cornue range top error codes, or see full La Cornue range top repair options.
